Deacro Industries Ltd.
Deacro Industries Ltd.
  • 26
  • 362 086
C800 Slitter Rewinder
The C800D is the most technologically advanced duplex cantilevered slitter rewinder in the converting industry. Deacro’s innovative slitting machine, rewind technology and servo-actuated lay-on roller system deliver the ability to rewind even the most difficult light gauge films and complex laminates.
The C800D can be operated in a ‘minimum gap mode’ for adhesives or cold seals as well as a dedicated narrow width option for narrow web rewind applications. Innovative designs have slashed required slitter setup time. At the touch of a button, the C800D slitter can be set to the correct running parameters. The C800D slitter rewinder can automatically position knives and cores, or it can indicate the core location for the operator.
When the slitter rewinding is complete, the C800D can automatically off-load the finished rolls onto one of our many different roll handling products. After the finished rolls have been removed, the operator simply slides new cores onto the rewind shafts to continue the slitting cycle. A set change is as simple as recalling a new file through the color touch screen. Operators never need to handle rewind tooling, handle shafts, setup knives or manually move rolls.
Переглядів: 2 944

Відео

Deacro T610D Turret Slitter Rewinder with Auto Core Loading
Переглядів 46 тис.8 років тому
The T610D twin-turret duplex slitter rewinder produces unmatched throughput by allowing the operator to setup cores on the outer rewind mandrels during the slitter runtime. This gives the T610D turret slitter rewinder a significant advantage over standard slitters due to the reduced downtime. A differential rewind system compensates for web gauge variation, allowing the T610D to rewind non-unif...
CS1000A
Переглядів 6929 років тому
CS1000A
HRC800 Unloader
Переглядів 1,8 тис.9 років тому
HRC800 Unloader
CM152 Core Cutter
Переглядів 95 тис.9 років тому
The CM152 is an innovative and simple to use core cutter machine for precise cut accuracy and high-speed cutting. The precision core cutter is capable of handling up to 60″ long cores with core IDs of 3″ or 6″. The CM152 is equipped with quick change tooling that allows operators to rapidly switch between 3″ and 6″ cores. After manually loading the core onto the CM152, operators quickly set the...
T10A Cycle
Переглядів 81210 років тому
Deacro offers the label and point-of-sale roll industry a technically advanced fully automatic slitter rewinder in its model T10A. High productivity is achieved using automatic core feeding, a turreted rewind with a glueless auto cut-and-transfer system and web speeds of up to 750 fpm (230 mpm). The T10A is PLC controlled and operator accessed via an accessible touch control screen. File recipe...
Auto Knife Positioning
Переглядів 6 тис.10 років тому
Auto Knife Positioning
C1000D Slitter Rewinder
Переглядів 2,3 тис.10 років тому
The C1000D is a cantilevered slitter rewinder that is capable of rewinding up to 40″ (1000 mm) roll diameters. This slitting machine is ideal for a wide range of extensible films, foils, papers and complex laminates. It has been designed to accommodate wide web widths and large roll ODs. Optional features such as Deacro’s rewind shaft technology and adjustable rewind shaft supports, extend the ...
R300B
Переглядів 42310 років тому
R300B
T610D Slitter Rewinder
Переглядів 4,1 тис.10 років тому
T610D Slitter Rewinder
Auto Knife Positioning
Переглядів 2,1 тис.10 років тому
Auto Knife Positioning
Razor Knives
Переглядів 1,1 тис.10 років тому
Razor Knives
Rapid Change Score Trolley
Переглядів 55011 років тому
Rapid Change Score Trolley
RS1000D Inspection Rewinder
Переглядів 2,4 тис.11 років тому
RS1000D Inspection Rewinder
Slitter Technology - Digital Knife Positioning
Переглядів 50 тис.11 років тому
The digital knife display upgrade greatly reduces knife setup times and increases slitting accuracy. With the digital knife display system, knives are moved and locked in place manually. However, a display provides the operator with the precise knife location. The operator then moves the knife holder until the digital display reads the correct location. For more information, visit www.deacro.com
C610-NW Inspection Slitter Rewinder
Переглядів 1,5 тис.11 років тому
C610-NW Inspection Slitter Rewinder
R800C Reversible Rewinder
Переглядів 2,5 тис.11 років тому
R800C Reversible Rewinder
T610B Slitter Rewinder & Auto Core Loader
Переглядів 10 тис.11 років тому
T610B Slitter Rewinder & Auto Core Loader
Short Roll Rewinder
Переглядів 14 тис.11 років тому
Short Roll Rewinder
R1000 Salvage Rewinder - 40" Rolls
Переглядів 3,5 тис.11 років тому
R1000 Salvage Rewinder - 40" Rolls
HC610B Roll Unloader
Переглядів 2,3 тис.11 років тому
HC610B Roll Unloader
Slitter Rewinder - CS1000B
Переглядів 20 тис.11 років тому
Slitter Rewinder - CS1000B
C1000C Slitter Rewinder - 40" Rolls
Переглядів 17 тис.11 років тому
C1000C Slitter Rewinder - 40" Rolls
C800C-OH Slitter Rewinder - Narrow Slits
Переглядів 3 тис.11 років тому
C800C-OH Slitter Rewinder - Narrow Slits
C610 Tape Slitter Rewinder
Переглядів 3,4 тис.11 років тому
C610 Tape Slitter Rewinder
Slitter Rewinder Technology - Auto Laser Core
Переглядів 69 тис.11 років тому
Slitter Rewinder Technology - Auto Laser Core

КОМЕНТАРІ

  • @chicagojbears
    @chicagojbears Місяць тому

    American Fuji seal I’ve used similar to this in the past and seamer machines

  • @sichuanshengongcarbidekniv9810
    @sichuanshengongcarbidekniv9810 Місяць тому

    Hi we more than 30+years experience and 300+employees, we are looking for an opportunity to introduce our carbide knives, carbide inlay bottom knives and ASP knives to you

  • @sreetharaneinfach8166
    @sreetharaneinfach8166 4 місяці тому

    What is price

  • @Trmmaryland
    @Trmmaryland 6 місяців тому

    Hmmmmmm

  • @user-tp4oo7jl8z
    @user-tp4oo7jl8z 7 місяців тому

    Excelente.cortador.tubo..de.carton

  • @andersonye8960
    @andersonye8960 7 місяців тому

    nice, we are slitter supplier from China.

  • @syedakmalhussainkazmi6414
    @syedakmalhussainkazmi6414 10 місяців тому

    Please share machine cost I m from lahore pakistan

  • @ayothiayothi441
    @ayothiayothi441 Рік тому

    Machine cost sir

  • @tkc_x24
    @tkc_x24 Рік тому

    ua-cam.com/video/eSl0oqZ-tlE/v-deo.html automatic core cutter

  • @vishvas_rajput_official9925

    Amezing sistam

  • @abboberg
    @abboberg 2 роки тому

    How is this "auto" when a person has to position the core by hand?

    • @jmkglass2356
      @jmkglass2356 8 місяців тому

      I was expecting the cores to line up automatically 🤷

    • @abboberg
      @abboberg 8 місяців тому

      @@jmkglass2356 It's surprising in this day and age that they aren't aligned automatically, from what I've found. These are usually small companies, and need the customer (with deeper pockets) to fund R&D to align the cores automatically. Unfortunately, it takes good leadership on the customer side to initiate such a thing. Factory workers are not always open to automation, since it removes some of their workload. Whenever a luddite gives me crap for being an automation engineer, I ask them, "Are you willing to discard your washer/dryer and do all your laundry by hand?" They always say, "no". Good leadership is hard to find these days.

  • @sumandriasumandria2253
    @sumandriasumandria2253 2 роки тому

    Would be very appreciated if u would be kind enough to let me know what is the dynamo motor hp is.thanks.GBU

  • @starkilla55
    @starkilla55 2 роки тому

    good lord this shit would be tedious as hell to set up i’m so glad we dont run something like this

    • @starkilla55
      @starkilla55 2 роки тому

      imagine you accidentally put one core off very slightly, now the rest of the rolls are starring

  • @farukahmed6451
    @farukahmed6451 2 роки тому

    দাম কতো

  • @BradAgostinelli
    @BradAgostinelli 2 роки тому

    How do you set it for each core

    • @sportosp-0158
      @sportosp-0158 8 місяців тому

      The part that they don't show you: You physically take a tape measure and go from a fixed and consistent point on the drive side of the machine to where the edge of the web actually falls upon the core. Then, you slide the bare core onto your rewind shaft to that precise measurement. Then, align your laser with the edge of that bare core. Easy

    • @brentlucas2211
      @brentlucas2211 5 місяців тому

      You program it in the computer you tell it what size jumbo you have on back or "the unwind side" then you program the size cuts you want in the front or "rewind side" and that's how the laser knows where to set each core on the front

    • @BradAgostinelli
      @BradAgostinelli 5 місяців тому

      @@brentlucas2211 is it a waste of time you have to pull 6 ft before you start the machine still

  • @shashikantsingh7854
    @shashikantsingh7854 3 роки тому

    Mast 👍

  • @suryalabelsystembhiwadi73
    @suryalabelsystembhiwadi73 3 роки тому

    Price watsapp number 9314315146

  • @leopard2a6yes85
    @leopard2a6yes85 3 роки тому

    came across this while search for a video on the T10A in war thunder but this is cool to watch

  • @devinmullins8267
    @devinmullins8267 3 роки тому

    Two slow for real life

  • @ramneekchopra7974
    @ramneekchopra7974 3 роки тому

    Machine cost sir

  • @ologunoresamuel3190
    @ologunoresamuel3190 3 роки тому

    Still no response to my request I believe you should close this access if no one is attending to it I may have to look elsewhere

  • @ologunoresamuel3190
    @ologunoresamuel3190 3 роки тому

    Hi am samuel am urgent needs for the Deacro converting machine c1000 slitter/Rewinder 40" to slitt Reel of paper into different sizes

  • @ologunoresamuel3190
    @ologunoresamuel3190 3 роки тому

    Can this slitt/rewind Reel paper if yes explain the difference between c1000c c1000R and others wish will be the best for paper siting/Rewinding business

  • @ologunoresamuel3190
    @ologunoresamuel3190 3 роки тому

    Am in urgent need of the machine I need detail quotations to include detailed capability, specifications speed etc as well cost of equipment delivery and installations. My paper Reel is 864 or 914mm with over 9980mm length . My need is to unwind,slit and rewind same diameter of paper Reel accurately with good speed and reliable PLC control . My contact is samuel sologunore@gmail.com +2348936205906 call & Whatsapp Lagos Nigeria . I need to slit the paper for a narrow web usage

  • @ghostrider0699
    @ghostrider0699 3 роки тому

    I m slitter opreter

    • @sportosp-0158
      @sportosp-0158 8 місяців тому

      Judging from the way you spell and compose your sentences: I'm sure you're not a good one.

  • @johnestefan3804
    @johnestefan3804 3 роки тому

    Wow! This flexible compact core cutter is available for under $20K US. Awesome!

  • @sugathhettiarachchi2224
    @sugathhettiarachchi2224 4 роки тому

    Can you pl send me price n more details to sugath@westernpapersl.com

  • @pattimcb31
    @pattimcb31 4 роки тому

    What do you do about a spliced roll with the edges are offset?

  • @pareshcurlys2131
    @pareshcurlys2131 4 роки тому

    Please give the price of the machine with specification sunny0711@gmail.com

  • @johnestefan3804
    @johnestefan3804 4 роки тому

    Very impressive technology. Reduce changeover and setup times.

  • @carloszhao8815
    @carloszhao8815 4 роки тому

    spreadet roll

  • @anglicky69
    @anglicky69 4 роки тому

    ehh, it's much cheaper just to take a marker and spot your core positions with those lines haha

    • @abboberg
      @abboberg 8 місяців тому

      Some places are doing it with lasers, but that is still in the 20th century.

    • @brentlucas2211
      @brentlucas2211 5 місяців тому

      As someone who has ran this machine the marker would keep wearing off and you have to keep measuring and remarking

  • @anglicky69
    @anglicky69 4 роки тому

    Deacros are probably some of the most durable and dependable machines in the shop. not really a fan of the layouts and limits of free action for changing over job setup. but, that's more a fault of job variety requirements rather than machine design

    • @slitterrewinderproducer
      @slitterrewinderproducer 7 місяців тому

      Hello, are you working with any of Deacro slitter rewinder?

    • @sportosp-0158
      @sportosp-0158 7 місяців тому

      Who, me?? Yes. Yes I have worked on them

    • @slitterrewinderproducer
      @slitterrewinderproducer 7 місяців тому

      @@sportosp-0158 where are you located? we are looking for people experienced with this machine.

  • @Nickplayz123
    @Nickplayz123 4 роки тому

    Sir hme core cutting mashin lena h 9911562808 call kigiye

  • @preet_sandhu_295
    @preet_sandhu_295 4 роки тому

    Whats price

    • @MrAlvarez919
      @MrAlvarez919 3 роки тому

      ua-cam.com/video/FYmC56LoslQ/v-deo.html

  • @sonusagarkumar3831
    @sonusagarkumar3831 4 роки тому

    9717389547

  • @sonusagarkumar3831
    @sonusagarkumar3831 4 роки тому

    Saleting ofretar sonu sagar

  • @sanjayram9237
    @sanjayram9237 4 роки тому

    👍️👍️👍️👍️👍️Good this machin I like this machin.....

  • @mihirmaharana87
    @mihirmaharana87 5 років тому

    Sir please siliter machine kaise setting video banaya

  • @claudiojofre5544
    @claudiojofre5544 5 років тому

    Excelentes maquinas yo trabajo en una titan ts 350 saludos desde argentina

  • @lovelystar5042
    @lovelystar5042 5 років тому

    Nice

    • @thessjerry7952
      @thessjerry7952 4 роки тому

      Nice I'm slitter operator in the packaging iam 22 years experience my personal number is +639306079902

  • @shyamlaljuneja2622
    @shyamlaljuneja2622 5 років тому

    Super

  • @imamfauzi9090
    @imamfauzi9090 5 років тому

    -/:87ll

  • @sheizadali165
    @sheizadali165 5 років тому

    I m shahzad . I m sileting opretar machine my xpriyance 10 year plz tell me I m dubhai coming my WhatsApp number 03122855480

  • @akshaymishra2598
    @akshaymishra2598 6 років тому

    send me the details & price of machine at akshay7285@gmail.com

  • @sadiqueazmi24
    @sadiqueazmi24 6 років тому

    Please give price of the machine with specification sadiqueazmi24@gmail.com

    • @DeacroIndustriesLtd
      @DeacroIndustriesLtd 6 років тому

      Please contact us at sales@deacro.com for any pricing quotes.

  • @praveengupta7874
    @praveengupta7874 6 років тому

    Contact us sairpack@rediffmail.com

  • @IAmJackpot444
    @IAmJackpot444 6 років тому

    nice

  • @edorarlatlas7590
    @edorarlatlas7590 6 років тому

    guive me your price

    • @DeacroIndustriesLtd
      @DeacroIndustriesLtd 6 років тому

      For any pricing questions, please email sales@deacro.com.